Guardian EyeSecure Faucet Mounted Eye Wash with shut-off, G1200, 01353613782
- Application: EyeSecure faucet-mounted eyewashes convert any faucet into an emergency eyewash station without interfering with normal faucet operation. An EyeSecure unit can be installed at any sink, close to where accidents might occur. In an emergency, the unit is rapidly located and activated, and provides an unlimited supply of potable water for rinsing the utilizer’s eyes. Faucet control valve offers single motion eyewash activation by allowing the pull knob to control water flow while the faucet remains ‘on’ at a preset temperature.
- operation: Unlike conventional faucet-mounted eyewashes, the G1200 offers the ability to activate the eyewash in a single motion. The unit is equipped with a diverter valve for the eyewash and a separate control valve for the faucet. Once the unit is installed on a faucet, the faucet may be opened and left “on” to a preset temperature. To utilize the faucet, the flow of water is controlled by a quarter-turn ball valve and knob at the bottom of the eyewash. To utilize the eyewash, ssuggest pull the knob on the front of the eyewash. Since the faucet is open, this is the only step required to activate the eyewash. Water pressure holds the eyewash in operation, leaving the utilizer’s hands free. To return to normal faucet operation, push the knob in or turn off the faucet.
- Outlet Heads: Outlet heads are mounted 3″ apart and deliver a soft, aerated flow of water. Heads angle forward toward utilizer. Angle of heads is adjustable to permit full coverage and avoid splashing. Furnished with float-off dust covers to protect outlet heads.
- Eyewash Valve: Forged brass diverter valve.
- Faucet Regulation Valve: Quarter turn ball valve with chrome plated brass ball, molded PTFE seals and plastic handle.
- Inlet: Body has 55/64”-27 female thread. Furnished with four adapters (15/16”-27, 13/16”-27, 3/8” NPS and 13/16”-24) for installing on most commonly utilized faucets, including laboratory-type faucets.
- Outlet: Furnished with removable aerator on bottom.
- Standard Guarantee: Each unit is completely assembled and water tested prior to shipment.
- Important: Faucet-mounted eyewashes are intended solely as supplemental units in addition to dedicated, plumbed eyewash equipment installed in the workplace.
Faucet-mounted eyewashes should be utilized with cold or warm water only. Use of hot water might cautilize scalding.
Leaving a faucet “on” with a valve at the outlet closed can cautilize cross-mixing of the hot and cold water. The water supply lines or the faucet should be furnished with check valves to prevent such mixing from occurring. This unit should not be installed on a faucet with an atmospheric vacuum breaker, as the faucet control valve downstream of the vacuum breaker will interfere with its function. Guardian recommends consulting with local plumbing code authorities prior to installing this unit.
Important: picture may differ from actual product






Reviews
There are no reviews yet.