Guardian EyeSecure Faucet Mounted Eye Wash, G1100

Guardian EyeSecure Faucet Mounted Eye Wash, G1100, 01353611223

• Application: EyeSecure faucet-mounted eyewashes convert any faucet into an emergency eyewash station without interfering with normal faucet operation. An EyeSecure unit can be installed at any sink, close to where accidents might occur. In an emergency, the unit is rapidly located and activated, and provides an unlimited supply of potable water for rinsing the utilizer’s eyes.
• Outlet Heads: Outlet heads are mounted 3″ apart and deliver a soft, aerated flow of water. Heads angle forward toward utilizer. Angle of heads is adjustable to permit full coverage and avoid splashing. Furnished with float-off dust covers to protect outlet heads.
• Valve: Forged brass diverter valve. Pull knob to activate eyewash; water pressure holds eyewash in operation, leaving utilizer’s hands free. Push knob or turn off faucet to return to normal faucet operation.
• Inlet: Body has 55/64”-27 female thread. Furnished with four adapters (15/16”-27, 13/16”-27, 3/8” NPS and 13/16”-24) for installing on most commonly utilized faucets, including laboratory-type faucets.
• Outlet: Furnished with removable aerator on bottom.
• Standard Guarantee: Each unit is completely assembled and water tested prior to shipment.
• Important: Faucet-mounted eyewashes, whether manufactured by Guardian or other companies, require two motions to operate (turn on water, pull knob to activate eyewash flow). Therefore, Guardian does not believe that these units meet the provisions of ANSI Z358.1-2014 as eyewash units. These units are intended solely as supplemental units in addition to dedicated, plumbed eyewash equipment installed in the workplace.

  Faucet-mounted eyewashes should be utilized with cold or warm water only. Use of hot water might cautilize scalding.

Important: picture may differ from actual product